HOME | QTH | MOBILE | TECHNICAL REFERENCE | POTPOURRI' | LINKS | CONTACT | 73'S |
|
|
|
Yaesu FT400 Cross-band mode
Entering Cross-band mode
- Turn the APRS modem off.
- Set the local Cross-band Repeater Frequency in the upper display (The Simplex Frequency that the handheld or mobile radio to be repeated to/from will use)
- - - - Select CH 47 for VHF - If you are repeating a UHF Frequency/Repeater
- - - - Select Ch 48 for UHF - If you are repeating a VHF Frequency/Repeater
- Set Selected Frequency to Cross-band in the lower display (the Repeater or Simplex Frequency that you wish to communicate with).
- Turn the FTM-400 off.
- Press and hold the lower 3 buttons to the right of the display then press the power button. “X-BAND Repeater” will be displayed between the upper and lower frequency displays, if the FTM-400 transferred into cross-band repeater mode.
Exiting Cross-band mode
- Turn the FTM-400 off.
- Press and hold the lower 3 buttons to the right of the display then press the power button. “X-BAND Repeater” will not be displayed between the upper and lower frequency displays, if the FTM-400 transferred out of cross-band repeater mode.